SITS SQUARE ON DOOR ! MODERN CRANKED DOOR BRUSH NYLON 10 -50 MM PREMIER 55

Regular price £8.66 Sale

THIS CRANKED DOOR BOTTOM BRUSH FITS MORE MODERN DOORS WITH DOOR BUILT INTO THE TIMBER FRAME , SEE DRAWINGS    DESIGNED BY GEORGE CULLEY IN 1981 , &...

In stock

George Culley / The Hairy Worm

£8.66
The Hairy Worm

THIS CRANKED DOOR BOTTOM BRUSH FITS MORE MODERN DOORS WITH DOOR BUILT INTO THE TIMBER FRAME , SEE DRAWINGS 
 
DESIGNED BY GEORGE CULLEY IN 1981 , & HIS BRAND "THE HAIRY WORM"  INTRODUCE :
 
important note :This is different to normal straight draught excluders
AND WORKS ON COMPRESSION NOT WIPE 

THE 0.890 METRE LONG PREMIER 55 WILL ONLY WORK WELL ON DOORS WITH IN LINE TIMBER THRESHOLDS AS ABOVE DRAWING  , EVEN IF SLIGHTLY TWISTED 

IT CAN ALSO WORK ON THE INSIDE , UPSIDE DOWN POINTED UP TO CLOSE AGAINST THE FRAME FITTED TO A GARAGE DOOR AT THE TOP OF THE DOOR
 
INSIDE ON A PAIR OF OPENING OUT FRENCH STYLE DOORS
 
Check out my other items!    IN THE CULLEY_FAMILY_SHOP

 

Regardless of the numbr of pieces you buy of Premier 55  , this product is shipped by a carrier called MYHERMES They take about 3-5 Working days from despatch,  FOR OLD CUSTOMERS IT IS NOW TOO LONG TO GO BY POST, AND IS A LONG TIME AS FIRST CLASS POST GOES PARCEL POST !

We are able to ship this item only to British Post Codes EXCLUDING THE CHANNEL ISLES 

 

Draught Proof now before winter Keep all the MICE out 

Seals by Culley, called Thehairyworm Premier 55 Strip

THE ORIGINAL 55 DEGREE BRUSH STRIP WITH A PAIR OF MAIN FEATURES 

NYLON 6 BRUSH , BEST FOR WEAR AND FLICKERBILITY 

NYLON 6 , NO PROBLEMS IF IT GETS WARM !! SEE BELOW 

MY SECTION I MADE DIFFERENT / TRY TO THINK ABOUT WHEN IT IS SCREW FIXED, THE JAW OF THE REAR OF THE BRUSH CARRIER IS IN LINE WITH THE FLAT LEG ,"SO WHAT" I HEAR YOU SAY, I MADE MY FIRST TOOLING WITH IT SLIGHTLY OUT AND AFTER TESTING WITH OPENING AND CLOSING A DOOR THE SCREWS WOULD WORK LOOSE ! , MINE IT IT FIXED AND THE SECTION HAS NO ROCKING AFTER BEING SCREWED UP ITS A STEADY FIX , SIMPLE AND BRITISH ,ALSO TESTED TO 100,000 OPENINGS AND CLOSINGS FOR TESTING IN MY OLD COMPANY TO BS7386.

  

These are made and supplied at 890 mm long (In old money, the size is 35 inches or 2 ft 11")

 

We make them this length to allow you to easily trim these to the correct sizes to suit your door, Multiple lengths can be used side by side with little loss of sealing benefit. THIS 890 MM WILL FIT THE MAJORITY OF DOMESTIC DOORS BUT PLEASE CHECK YOUR WIDTH 

 

(Whilst this range will seal up to 20mm under a door , use longer brush , SEE BELOW 

YOU WILL ALSO NEED TO ATTEND TO THE PERPENDICULAR DRAUGHTS AND POSSIBLE USING THEHAIRYWORM ACOESS THE INSIDE OF THE DOOR , DEPENDS ON SPACE THAT WILL BE SEPARATE SEAL

 

we do make bigger straight 180 degree premier strip and make a thicker industrial range from 25 to 150 mm) 

 

Please choose the correct size brush

10 mm size is for fine draught proofing from 0 - 2 mm gaps (we also make smaller seals)

15 mm size is for fine draught proofing from 0 - 5 mm gaps

22 mm size is for fine draught proofing from 0 - 10 mm gaps

30 mm size is for fine draught proofing from 0 - 15 mm gaps

35 mm size is for fine draught proofing from 0 - 17 mm gaps

50 mm size is for fine draught proofing from 0 - 20 mm gaps

 

 

 

WE CAN GO BIGGER IN NORMAL BRUSH , IF YOU HAVE A FACTORY , LOOK AT YOUR INDUSTRIAL DOORS!!

PLEASE ASK

 

 

 

THIS IS A UK MADE PRODUCT AND IS USED BY DOOR REPAIR COMPANIES AND GENERAL INDUSTRY

 

 

 

Garage doors : this can be made into a kit by buying more 890 mm lengths. It can still go by the economical route of: MYHERMES

 

 

 ie Buy 3 Pieces @ 890 mm  OF AN UP AND OVER GARAGE DOOR) WITH THIS KIT IT WILL SEAL FROM 2.00 METRES UP TO 2.670 METRES ,  (6  FEET  TO 8 FEET 9 “ wide ) 

 

ie Buy 4 Pieces @ 890 mm FOR UP THE TOP OF AN UP AND OVER GARAGE DOOR) WITH THIS KIT IT WILL SEAL FROM 2.00 METRES UP TO 3.560 METRES ,  (9  FEET to TO 11 FEET  8"   wide ) and so on ........ 

 

It is easy to fit , just follow the simple instructions included , then THEHAIRYWORM Will give you a long life.

 

 IF YOU NEED OTHER SIZES PLEASE ASK, OTHER TRIMS ON OUR CULLEY_FAMILY_SHOP

  

 

 

This correctly made brush strip is not an import; this is made in the UK with pride

 

 

 

MATERIALS:

We make a full fill brush with the right components. This is our 4 mm series backing width brush  Our brushes are made of nylon 6 an important factor we feel.

 

The carrier is made from architectural aluminium a point worth noting, it makes the carrier stronger, its  "h" holder is CRANKED AT 55 DEGREES , the trim of brush is measured out of the steel backing inside the aluminium on this sizing giving about 2 mm of bristle less on all sizes out of the aluminium holder.

 

For the technically minded:

Nylon 6 is a harder wearing material against concrete and other hardwearing surfaces than polypropylene 

Nylon 6 has a higher working temperature of about 145 degrees centigrade, Polyproylene softens far earlier than this.

We do not use Polypropylene but competitors do , it softens at 70 – 80 degrees centigrade. This is a temperature your garage door reaches when it gets warm in the summer , when warm polypropylene bristles then bend and stays bent causing the brush to appear to move away from its opposing surface, as they cool they stay the same size curled not touching the opposite side 

I will leave you to decide which is the right choice , I will say chalk and cheese!  


(A lot of competitors use this and also partial fill! to make brushes lower in cost for them! We dont short change.

 

The Premier 55 on opening and closing should offer little resistance if you have motor driven doors.

 

 

 

 

This item is suitable for draught proofing , dust  sealing , dust sealing , insect sealing , stops flies , stops moths , cockroaches yes they are in the UK, aluminium,timber ,steel , PVCu, GRP  doors,

 

 

 

 Cuts easily with top hardened cutters, or good pincers and junior hacksaw, comes with full fitting instructions, you need to follow the full instructions 

 

WE DO NOT SUPPLY SCREWS AS WE KNOW DIFFERENT SURFACES REQUIRE DIFFERENT FIXINGS AND DIFFERENT COLOURS, A

 

 

We have also developed and have on sale "thehairyworm" seal to go up the sides of an up and over door ,please look on our shop~ CHECK THIS OUT ! 

 

Culley’s also stock a large range of other style draught excluders, brush strips & weather strip products and also trade rubber extrusions.

 

 

 

Please enquire:  Via e bay questions:

For correct advice for help sealing other styles of windows or doors; we solve 95% of problems with draught invasion! Our product offers money saving where heating takes place.

 

 

DON’T HEAT THE STREET, SAVE IT!!! ITS YOUR MONEY 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.